Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x

The complete software package ... and more!

No compromises! With the PREMIUMspot VISION you receive the full software package for your all-round carefree vehicle repair.

With the up-to-date VM3 process control, you have the last 9 years of accumulated "welding experience" on board: Since the introduction of the VM2 in 2008, the new welding parameters that have since been developed in the course of customer projects or in the in-house application technology for test welds have now been evaluated and included in the VM3 database. The complete package contains:

VISION-AUTO, VISION-SPECIAL, VISION-ALU, ELMA-QS, STANDARD, SINGLE, OPEL, OPEL-VP

Welding process - all this is possible and allows maximum flexibility:

  • Spot welding in fully automatic mode without any previous settings
  • (Semi-automatic) spot welding with quality assurance, energy control:
    Welding programs for high-strength to ultra-high-strength plates, coated plates, plates with paint residues, including automatic shunt detection and control, as well as vehicle-specific programs with parameters approved by the automobile manufacturers.
  • Conventional spot welding in standard mode by current / time
  • Spotting, dent removal, sheet pulling, welding of T-bolts (with optional spotter)

Standard delivery program

  • Fully automatic spot welding machine PREMIUMspot VISION with Virtual Machine (VM3) welding process control
  • 1 C-gun with 6 m cable hose package with quick couplings (both sides)
  • 4 arms with 40 mm / 80 mm / 350 mm / 500 mm outreach
  • 10 m main connection with 32 Amp. plug
  • 1 electrode case with electrodes for the various fittings

Features

  • High welding currents even with low fuse protection
  • High output currents >13 kA
  • Point by point quality statement
  • Energy control
  • Shunt detection
  • Reproducible welding quality
  • Welding parameters can be updated at any time via USB stick
  • Callable welding parameter printout via SpotQS Viewer (optional)
  • Complies with the exposure limit values of the EU Directive 2004/40/EC
  • Simple and quick change of C- and X-welding guns: Complete gun switch-off, switch-off of the water pump via VM interface without switching off the machine beforehand

 

ELMA-Tech C-spot welding gun with different fittings.

The process control that makes the difference!

Core technology of ELMA-Tech spot welding technology: Welding process control Virtual Machine.
The ELMA-Tech process control makes the difference!

 

Body repair easier than ever before:

  • Switch on the machine
  • Select the software mode "VISION" for automatic welding
  • Perform electrode check
  • Getting started with spot welding

 
The fully automatic welding mode ensures maximum efficiency during operation, because this saves a lot of time: The machine controls the spot welding process automatically. With consistently outstanding quality of the welding results.

 

Electrode case

ELMA-Tech electrode case for PREMIUMspot VISION spot welding machine.

ELMA-Tech would like to offer you the best possible service. We store information about your visit in so-called cookies. By using this website, you agree to the use of cookies. Detailed information on the use of cookies on this website can be obtained by clicking on "More info ...".